Welcome to EMBRACE - BRSH

ISO 11999 specifies minimum design and performance requirements for personal protective equipment (PPE) to be used by firefighters, primarily but not solely to protect against exposure to flame and high thermal loads. To assist with choice based on user risk assessment, types and performance levels for different categories of protection are included. The scope of ISO 11999-1:2015 does not include PPE for use in high-risk fire exposures where, for example, protective clothing with reflective surface according to ISO 15538 might be more appropriate, or for use in long-term firefighting operations in high ambient temperature (for example, bush, wildland, or forest firefighting) where equipment according to ISO 16073 might be more appropriate. Similarly, ISO 11999 does not include PPE to protect against chemical and biological hazards, other than against short-term and accidental exposure while engaged in firefighting and associated activities when fighting fires occurring in structures. ISO 11999-1:2015 describes the general structure of this International Standard, sets design and performance requirements for PPE, and includes requirements for marking and manufacturer's instructions.

The Beth-El EPCS system series (Environmental Protection and Control System) are compact and modular, hybrid ventilation and NBC filtration systems that are combined with an air conditioning unit, designed to provide humidity and temperature controlled clean air to the vehicle crew compartment. In addition, carbon monoxide filtration is integrated with the system, which cleans the air from harmful gases, protecting the crew from toxic levels of noxious gasses that WHO (the World Health Organization) and the EU (European Union) have created new legislation against. The VM-series systems can be accommodated into any container or armored vehicle chassis and utilize a highly efficient cyclone filter for heavy duty sand and dust extraction, followed by a prefilter for any ­remaining fine dust. An NBC filter stage follows these dust ­filtration stages to remove nuclear, biological, and chemical ­particles from the air. The FA180 VM-7 does not have the environmental conditioning systems of the EPCS series. SPECIFICATIONS Compliant to Stanag 2895, Mil-Std 461, 810F, 1275 & 1473 Continuous operation Yes Control system Varied Cooling capacity (in kW) 18-25 Filter spec Stanag 2895, AEP 54, Bundeswehr, MIL-STD 461, 810F, 1275 & 1473 Filter type All MTBF rating (hrs) >20,000 NBC flow rate 60-145 No of filters [AG] 3 No. of filters [AG] 3 Power supply 28V Product Concept Vehicle Stackable Yes Tested by [AG] NATO: WEIGHT: 100.00KG DIMENSIONS": 45.00CM X 80.00CM X 65.00CM

The portable Toxin Detector (pTD) allows the rapid, specific and sensitive identification of multiple toxins. Sampling The system is able to analyze liquid and solid samples. Sample preparation includes resuspension and filtration of sample matrices using pTD Sample Preparation Kit. Technology The detection principle is based on an electrochemical Enzyme-linked Immunosorbent Assay (ELISA) procedure. Features Parallel analysis of five toxins in less than 25 minutes, excellent sensitivities, minimal sample preparation, automated sample and data processing, portable instrument, integrated positive and negative control, integrated decontamination procedure, extendable to new threats. Device Types and Application The system is intended for on-site analysis of toxins in mobile labs and onboard vehicles. Consumables and Maintenance Recently, there are four Kits available for the pTD. 1. Sample Preparation Kit - includes all buffers and consumables necessary for two sample preparations. 2. Toxin Test Kit BWA I - detection of BoNT/A, BoNT/B, BoNT/E (all CDC Category A), ricin and SEB (both CDC Category B) (5 measurements). 3. Toxin Test Kit BWA II - detection of BoNT/A, BoNT/B, BoNT/F (all CDC Category A), ricin and SEB (both CDC Category B) (5 measurements). 4. Training Kit - detection of goat immunoglobulin G (IgG) as an analog for a proteinaceous toxin (2 measurements). 5. Washing Kit - before storage the system fluidics have to be cleaned by using this kit. All kits have to be stored at +4 to +8°C. The shelf lifetime is 6 months. No preventive maintenance is required.

The GDA-S is a continuously operating chemical agent detection system.

A chemically protective anti-static boot with an integral steel toe cap and vulcanized rubber sole for superior slip resistance.

The WTC 700 purifies up to 700 liters of drinking water per hour and is especially suitable in situations, when it is unclear, if fresh or salt water or even chemically contaminated water is to be purified. The system is made from high quality materials and proven components, which guarantee extreme reliability. The purification process does not require the use of any chemicals, not even anti-scalant for the pre-treatment and chlorine is only added to the purified water to minimise the risk of recontamination during storage. A quick and intuitive operation is ensured by the clear and systematic arrangement of the user interface. The system can be carried using the integrated carrying handles. All surfaces in contact with drinking water comply with internationally recognised standards and regulations (e.g. DVGW, KTW, KIWA, NSF or ACS). Our customers have used Kärcher Futuretech systems in a variety of national and international missions to treat and distribute raw water to drinking water. The respective requirements for drinking water quality (e.g. German Drinking Water Ordinance 2001, WHO Drinking Water Guidelines) were fully complied with. FEATURES AND BENEFITS Safe drinking water: - Reliable reverse osmosis membrane - Reliable containment of bacteria/viruses - Reliable containment of salt and chemicals Reliable operation: - High-quality materials and workmanship - Robust components - Stainless steel (V4A) pump head Easy operation: - Intuitive operating concept - Just one central mode selector switch - Easy to understand pictograms and colour coding No chemicals required for operation: - Physical filtration process - No antiscalant required due to high overflow - Chlorination only for depot effect Simple logistics: - Dimensions of a standard Euro pallet - Integrated transport aid for transporting by hand Good ergonomics: Round tubes for a user-friendly grip Ready for use fast: - Everything is integrated (pre-filter, pressure monitoring, etc.) - To start up, simply connect the raw water pump, hoses and electricity Satisfies the highest standards: - Number of components in contact with drinking water reduced to a minimum - Satisfies quality requirements for drinking water from the WHO and the German Drinking Water Ordinance - All surfaces that are in direct contact with drinking water conform to internationally known and accepted regulations (e.g. DVGW (German Technical & Scientific Association for Gas and Water), NSF) Technical data: Daily workload (l) max. 12000 Dimensions (L x W x H) (mm) 1210 / 790 / 910 Total weight (kg) 230 Hose connection Storz D